Latest cable joint kit repair Tenders | Government cable joint kit repair Tenders

Central Government/Public Sector

CTN :44882339

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 3.5 ton u.h jib crane [yd cr 774] with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, electrical wirings, hooks, snatch blocks/hook blocks, wire ropes carrying the hooks and gear boxes driver cabin,fans,alarms,ladder inside the driver cabin,master controls,lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements note: main power collection bus bars/angles, main ladder to climb onto the crane are not for sale and these should not be disturbed by the purchaser as these belong to railways. uc no. 123133002. makers name-greaves chitram co.total approximate weight 21600 kgs. [mild steel 21333 kgs, cast iron 200 kgs, copper 40 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 20 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-00915 dated. 26.11.25. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.

Central Government/Public Sector

CTN :44882341

22 Apr, 2026 NA

Multi City - Tamil Nadu

Tender For auction sale of depot ferrous scrap - pl no. 9832 2000 condemned and unserviceable 15 ton eot crane (crs-cr-711), with overall span of 14.376 mtrs, with electrical motors, panel boxes,panel boards, rope drum, bridge drive girder, bridge idler girder, bridge rail, bridge drive and idler wheels, trolley and its frame, dsl guard, electrical wirings,driver cabin,fan,alarms,ladder inside the driver cabin,master controls, wire ropes carrying the hooks, lights attached to the crane,current collectors , cross travel cables between the run way rails of the crane and other ferrous/non ferrous original attachements. note: hooks, snatch blocks/hook blocks, main power collection dsl bus bars/angles of the crane, main ladder to climb onto the crane, two long travel gear boxes and one cross travel gear box are not for sale. the two long travel gear boxes, one cross travel gear box, hooks and snatch blocks/hook blocks should be returned to the custodian by the purchaser before delivery. for handing over the gear boxes, purchaser should follow dismantling using proper tools instead of cutting in order to avoid damages. main power collection bus bars/angles and the ladder to climb on to the crane should not be disturbed as these belong to railways. uc no.120732002. makers name-vaughan crane/england.total approximate weight 11000 kgs. [mild steel 10687 kgs, cast iron 200 kgs, copper 56 kgs, brass/bronze 5 kgs, aluminium 2 kgs, wastage 50 kgs, other non ferrous: negligible] . as is where is condition. vide scrap advice note no. 012282-25-01419 dated. 20.02.26. custodian . sse / mmw/ goc. note: 1] rate per number should be quoted. 2] crane loading is permitted. 3] cutting is permitted and purchaser has to arrange three pipe gas cutting torch with jointless safety hoses attached with back arrest. 4] purchaser adviced, labours should wear all ppes and follow the safety aspects as per rule in force. 5] purchaser is permitted to dismantle the structure on delivery 6] the purchaser should survey the item before bidding. 7] the purchaser is responsible for any loss if occurs to railways during delivery. 8] utmost care should be taken while uprooting and lowering the crane by the purchaser.

Central Government/Public Sector

CTN :44533737

16 Apr, 2026 NA

East Godavari - Andhra Pradesh

Tender For corrigendum : hiring of services for replacement of luff wire rope for plqp crane and replacement of luffing gearbox for plqp and ddw cranes.

Central Government/Public Sector

CTN :44667703

24 Apr, 2026 NA

Mumbai - Maharashtra

Tender For corrigendum : procurement of of spares of patriot make crane for mh asset - seal oil sl, o ring, o ring, o ring, seal oil sl, o ring, o ring, o ring, o ring back up, o ring, o ring back up, o ring, hose assembly, hose assembly, hose assembly, main aux hydraulic pump, boom pump, swing pump, anti 2 block system (for main & aux)-hyd, fleeting sheave, slew system high pr.filter, slew pump, bushing- lever housing, lever arm-dog, retaining plate, brake band assembly, sheave for pendant block boom hoist, pin sheave 31/2" dia 24" long for pendan, actuator stub plate, pin sheave 31/2" dia for main frame, nyloc washer 4" od, nyloc washer 4" od 31/2"id and 1/8" thic, kit directional control valve, main/ aux hydraulic pump, boom hoist & swing pump(a tandem unit), check valve, gear coupling ( pump drive adapter), regulator valve, hydraulic oil cooler, repair kit of 4 way 3 position tandem, repair kit of rp70 pilot operated relief, repair kit of 4 way 3 position tandem, repair kit of 4 way 3 position tandem, joystick valves, hydraulic valves, pilot dump valve, counter balance valve, pressure reducing valve, radiator, engine, hydraulic tank breather, kit suction filter assembly, bushing lever housing, lever brake band, retaining plate, suction filter, hydraulic oil filter, air intake filter, valve main, valve swing, air filter, pilot valve, joystick valves, winch motor, winch motor, engine oil pressure gauge, 2 pos/ 2 way valve, shuttle valve, gauge, kit , return filter assembly, hydraulic oil pressure guage, drive pinion, swing gear box, hydraulic swing motor, hydraulic swing brake, triple section hydraulic pump, boom hoist winch-include luffing pawl), friction plates for boom winch brake, brake discs, u-cup seal, piston back up ring, brake spring, o-ring, back up washer, o-ring, slew hyd.pre.gauge, o-ring/seal kit, o-ring/seal kit, o ring / seal kit, o ring / seal kit, engine foot throttle, gauge, pilot pressure, hoist selector valve, joy stick pressure gauge, slew hyd. pr. gauge, hand pump, air pressure gauge, eng start valve, engine shutdown valve, foot valve, radiator, cable emergency stop, return filter assembly, kit, suction filter assembly, kit, diesel and hydraulic oil tank gasket, air pressure gauge, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine oil pressure gauge, engine stop cable, water temp.gauge, magnetic pick up, joy stick, main/ auxiliary, joy stick , boom / slew, clamps for main,aux.& boom wire rope, swing brake, limit switch assembly, wiper motor with arm, blade and switch, anti 2 block system ( main & aux. hoist, compressor safety valve, drain valve, horn switch - push type, selector valve, pilot pressure valve, kit hydraulic directional valve, pilot pressure valve, gauge,hyd control - pressure., hydraulic oil cooler, return filter assembly, kit, suction filter assembly, kit, swing gear box, swing drive pinion, swing brake, joy stick, main/ auxiliary, joy stick , boom / slew, pilot dump valve, pressure reducing valve, 2 position 2 way valve, shuttle valve, engine stop cable

CTN :44829737

17 Apr, 2026 23.20 Lacs

Jalgaon - Maharashtra

Tender For repairs and maintenance work of goliath crane 16 mt, repairing air vent pipe, providing under water divers for water leakage proofing to stop log gate and slot for replacing of damaged turn buckle, wire rope and rubber seal and providing and fitting

CTN :44841917

13 Apr, 2026 NA

Asansol - West Bengal

Tender For corrigendum : supply & fitting of spares for 45-ton middle eot crane 1. auxiliary hoist for 45-ton middle eot crane capacity: 7.5 ton quantity: 01 no. 2. gear pinion with shaft for auxiliary hoist with bearing, o-ring, and gasket 3.steel wire rope: diameter: 16 mm [ warranty period: 30 months after the date of delivery ]

Central Government / Public Sector

CTN :44793611

28 Apr, 2026 NA

Mancheshwar - Odisha

Tender For corrigendum : supply, installation and commissioning of jib crane-01 ton cap. with wire rope electrical hoistand 360 degree motorized slewing as per specification attached at annexure or similar [ warrantyperiod: 30 months after the date of delivery ]

Central Government/Public Sector

CTN :44759633

13 Apr, 2026 NA

Multi City - Haryana

Tender For auction sale of depot ferrous scrap - scrap re & signaling material consisting of pillers, post,point machine without motor ,pipes, rounds, g. i.& m.s pipes,junction box with or w/o electrical fitting if any, s & t boxes,tia bar, rods,signaling light fitting, fire extinguisher, and other fs/ nfs attachments if any, angles,trd items,signal pipes & electric poles, poles,signal post,galv. wire, mast (trd),cantilever,signal post, ladder, wire-ropes, lever,mast, girder,other structure, mixed with other m.s. & c.i. scrap including nut bolts etc of sorts & sizes with or w/o nfs attachment if any, us & ur,as it is. loc:- material lying at bin no. a-37 in scrap yard judw remarks:-[1] loading by purchaser [2].cutting allowed for loading purpose only. [3].cutting will be allowed after following all the fire prevention related instruction of judw depot [4].private road crane allowed for loading purpose. note- 1.loose nfs & motors will be taken back if any found in lot.

CTN :44747005

10 Apr, 2026 NA

Saran - Bihar

Tender For supply of ungalvanised 28mm diameter wire rope sling of effective length 52 mts. the one end of the sling shall be crimped hydraulically with standard ferrule and forged solid thimble. the wire rope shall be of steel core to iwrc, rho lay, 6 x 36 construction and tensile grade 1770n sqmm as per is-2266 latest. the wire rope sling to be fitted in class iv hot metal handling 40 tonne eot crane of steel melting shop. the forged solid thimble shall be as per is-2315. [ warranty period: 12 months after the date of delivery ]

corporations/Associations/Others

CTN :44727538

09 Apr, 2026 NA

Jabalpur - Madhya Pradesh

Tender For auction sale of fork lift 3 ton cap,extruder machine of drop wire manufacturing,extruder machiune of jumper wire manufacturing,machanical power press 50 ton cap,machanical power press 100 ton cap,machanical power press 75 ton cap,hydrolic mobile crane

Cable Joint Kit Repair Tenders

By Cities

By States

By Agencies

By Ownerships

By Sectors

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government/Public Sector

Central Government / Public Sector

Central Government/Public Sector

corporations/Associations/Others